Moxa Technologies UC-7400 - Manual (Page 5)

UC-7400 Hardware User’s Manual Introduction
1-2
Overview
The MOXA UC-7400 Series (herein after referred to as UC-7400) includes UC-7420, UC-7410,
UC-7408, and UC-7402. These RISC-based ready-to-run embedded computers are ideal for
embedded applications. UC-7400 series feature 8 RS-232/422/485 serial ports, dual 10/100 Mbps
Ethernet ports, 8 digital input channels and 8 digital output channels, a PCMCIA interface for
wireless LAN communication, a CompactFlash slot for flash disk expansion, and USB ports for
adding additional memory (such as a USB Flash disk).
The UC-7400 series use an Intel XScale IXP-422 266 MHz RISC CPU. Unlike the X86 CPU,
which uses a CISC design, the IXP-422’s RISC design architecture and modern semiconductor
technology provide UC-7400 with a powerful computing engine and communication functions, but
without generating a lot of heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM give
you enough memory to run your application software directly on UC-7400. As the dual LAN ports
are built right into the IXP-422 CPU, UC-7400 makes an ideal communication platform for
Network Security applications. If your application requires placing UC-7400 at a site that is not
located near an Ethernet LAN connection, you can connect to the network by using UC-7400’s
PCMCIA port to attach a wireless LAN card.
Package Checklist
All models of the UC-7400 series are shipped with the following items:
y 1 UC-7400 Series Embedded Computer
y Wall-Mounting Kit
y DIN-Rail Mounting Kit
y Quick Installation Guide
y Document & Software CD
y Cross-over Ethernet cable
y CBL-RJ45M9-150: 150 cm, 8-pin RJ45 to Male DB9 serial port cable (Except UC-7402)
y CBL-RJ45F9-150: 150 cm, 8-pin RJ45 to Female DB9 console port cable
y Universal Power Adapter
y Product Warranty Booklet
NOTE: Notify your sales representative if any of the above items is missing or damaged.