M-AUDIO CX8 - Manual (Page 15)

15
English
Studiophile TM CX8 User Guide
8. Appendix A - Technical Specifications
Frequency response: 38Hz-30kHz (+/-3dB)
Crossover frequency: 2.7kHz
Low-frequency amplifier
power: 80 watts with 14 gauge wiring to this transducer
High-frequency
amplifier power: 40 watts with 14 gauge wiring to this transducer
LF cutoff Flat, 60Hz, and 80Hz
MF boost In/Out of 2dB centered at 2kHz
HF trim +2dB, 0dB, -2dB above 3kHz
Acoustic space 0dB, -2dB, and -4dB
Maximum
signal-to-noise
(dynamic range): > 97 dB (typical A-weighted)
Polarity: positive signal at + input produce outward LF cone displacement
Input impedance: 20k ohms balanced,
10k ohms unbalanced
Input sensitivity: 100 mV pink noise input produces 95 dBA output SPL at one meter with volume
control at maximum
Power: factory programmed for either 115V ~50/60Hz or 230V ~50/60Hz
Protection: RF interference, output current limiting, over temperature,
turn-on/off transient, subsonic filter, external mains fuse
Cabinet: Front and rear baffle 1” MDF with ¾” MDF wrap. Black lacquer paint on enclosure
with soft touch black paint on curved front plate.
Size: 17” (H) x 11” (W) x 13” (D); 43.2cm x 28cm x 33cm
Weight: 30.42 lbs./unit; 13.8 kg
Above specifications subject to change without notice