Mio C210 - Manual (Page 65)

65
Example: to let you better understand how this feature works, here is an example. If
you use the setting on the left (portrait) screen example (+10 km/h – 100 km/h –
+5%), MioMap will warn you when driving at the following speeds:
Speed
limit
Warning
at
40 km/h 50 km/h
(=40 km/h + 10
km/h)
60 km/h 70 km/h
(=60 km/h + 10
km/h)
90 km/h 100 km/h
(=90 km/h + 10
km/h)
100 km/h 105 km/h (=100 km/h + 5%)
120 km/h 126 km/h (=120 km/h + 5%)
160 km/h 168 km/h (=160 km/h + 5%)
6.1.4 Enable Speed Camera Warning
MioMap contains a built-in database of known speed and red light cameras, and you
can also add further cameras you discover using the Add Cam button in the Cursor
menu (Page 26). The types and parameters of speed cameras are explained here:
Page 46.
In this section you can enable or disable the warning for known cameras, and you
can also fine-tune the way MioMap warns you when you approach one of these
cameras.
6.1.5 Speed Camera Options
When speed camera warning is turned on, the values of these controls determine
how the user will be notified when approaching a speed camera.
6.1.5.1 Audible Warning
You can disable the audible warning; have a simple warning (when you are warned
only if you exceed the speed limit when approaching a camera); or a complex sound
with repeated beeps as you approach the camera. In case of section control
cameras, you will also hear these beeps while you are between the two cameras
(these cameras work in pairs).