Miele LaPerla G 2830 SCi - Manual (Page 60)

Issue Possible fault Solution
Dishes are not dry,
glasses and
cutlery are
spotted? The rinse aid setting may
be too low or the rinse aid
reservoir is empty. Increase the dosage, refill the
reservoir or switch the rinse
aid product when refilling, see
"Before using for the first
time".
Dishes were taken out too
soon. Leave dishes in longer, see
"Use".
"2 in 1" or "3 in 1" products
were used. These products
have a low drying effect. Set the detergent type to
"Powder" and insert rinse aid.
See "Settings J - Detergent".
The detergent "2 in 1" or
"3 in 1" is set, but another
product was used. Select the detergent setting to
the detergent used. See
"Settings J - Detergent".
White residue is
visible on cutlery
and dishes,
clouding occurs on
glassware and film
can be wiped off. Not enough rinse aid was
used. Increase the dosage. See
"Settings J - Rinse aid".
The salt container is empty. Refill salt, see "Before using
for the first time".
Unsuitable "2 in 1" or "3 in 1"
products were used. Use a different detergent.
Try normal tabs or powder
detergent.
The automatic water
softener unit is defective. Call Miele Technical Service.
Frequently asked questions
60