Miller Camera Support TRIPOD SERIES - Manual (Page 5)

Mid Position:
Note: This refers to the Mid leg
angle position, not necessarily the
height of the tripod.
The SOLO VJ tripod has three leg angle
positions. The middle leg angle position
(Fig.7) is self-engaging after
unspreading leg from fully spread
position (Fig.6). The Mid Position is
chosen for optimum stability in the 60-
140cm tripod height range, but is not
recommended if the tripod is being used
in a crowded situation,
due to the wide
diameter, or footprint
spread, of the extended
tripod.
1 Remove camera from fluid head.
2 Close the tripod legs so all are pointing
straight down and disengage all
concentric locks.
3 Holding the bowl, lower tripod to its
shortest length and re-engage
concentric locks.
4 Fold legs fully together (Fig. 1) fit leg strap and return tripod to
carry bag if finished shooting.
5
Fig 6 Spread Position
Tripod Setup (cont) Tripod Pull Down
Fig 5 Leg angle adjuster
raised
Fig 7 Middle leg
angle position
819 Solo VJ V2 16/1/04 11:25 AM Page 5