Magnadyne MV-VS2 - Manual (Page 2)

Installation and User Manual
Model: MV-VS2
Connection and Operation
1. A 6 foot long RCA male patch cord is provided with the MV-
VS2 to make the connection from the MV-VS2 output on the
rear panel to the Mobile Video System Screen. Some installa-
tions may require a longer cable which can be purchased at a
local electronics store.
2. Both “Rear Aux Inputs” of the MV-VS2 are typically reserved
for permanent items that will not be removed from the vehicle
such as a video game controller, VCD or second DVD.
3. The front panel connection is typically for non-permanent
items that will be removed from the vehicle such as a video
game controller or camcorder.
4. The 3 position switch on the front panel is used to select the
signal source to the Mobile Video system.
RCA Male Patch Cord
Supplied
POWER SUPPLY
Supplied with
Some MV Systems
V R L
AV 2 INPUT
AV 3 INPUT
V R L
AV OUTPUT
LINE
OUT
AUDIO
R
L
VIDEO
Permanent Item:
DVD,
Video Game
AUDIO OUT
Connect Red White Male RCA Connectors from
patch cord connected to MV-VS2 Rear Aux Input
connectors
VIDEO OUT
Connect Yellow Male RCA Connector from patch cord
connected to MV-VS2 Rear Aux Input connectors
RCA Male Patch Cord
Not Supplied
Not Supplied
LINE
OUT
AUDIO
R
L
VIDEO
Permanent Item:
DVD,
Video Game
Not Supplied
Supplied (MV-VS2)
MV VS2 Rear Panel
Auxiliary 2
Auxiliary 3
Industry Standard Color Code:
Yellow . . . Video Signal
Red = . . . Right Audio Signal
White = . . Left Audio Signal
All the connectors on the MV-VS2 are female
RCA type with industry standard color code
indication. Any device to be connected to the
MV-VS2 will require a 3 conductor Male-to-
Male RCA jumper cable that will either be
supplied with the device or can be purchased
at a local electronics store.
VIDEO GAME
Not Supplied
CAMCORDER
Not Supplied
AV 1 INPUT
AV 3 INPUT AV 1 INPUT
AV 2 INPUT
Signal
Source
Switch
Front Panel
INPUT SELECT
or 3 Source A/V Selector Switch
MV-VS2