MITSUBISHI ELECTRIC HC5500 - Manual (Page 44)

EN-44
The specifi cations and outside appearance of the projector are subject to change without prior notice.
Type LCD projector
Model HC5500
Display technology 0.74-inch LCD panel: 3 pieces (for R, G, B) (aspect ratio 16:9)
Pixel: 1920 x 1080 = 2073600 pixels
Total 6220800 pixels
Projection lens F 1.7 - 1.9 f= 24 - 29 mm
Light-source lamp 160 W
Image size (projection distance) 50” min. to 250” max. (projection distance 1.6 to 8.0 m (max. Zoom))
Maximum
resolution Computer signal Maximum resolution: 1600 x 1200 dots
Panel resolution: 1920 x 1080 dots
Video signal NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
Component signal 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Panel resolution: 1920 x 1080 dots
Computer input [Signal type] [Terminal type] [Line]
Analog RGB Mini D-SUB 15-pin 1
Video input [Signal type] [Terminal type] [Line]
HDMI HDMI 2
Video input
RCA 1
S-video input S 1
Component video input RCA x3 (YC
B
C
R
/YP
B
P
R
) 1
Control terminal/
others SERIAL RS-232C (D-SUB 9-pin)
TRIGGER DC 12 V, max. 200 mA (stereo mini jack)
Operating temperatures +41°F (+5°C) to +95°F (+35°C)
Rated voltage AC100 - 240 V, 50/60 Hz
Power consumption 2.5 A
Dimensions 334 mm (W) x 125 mm (H) x 352 mm (D) * Not including protrusion.
Weight 5.6 kg
Others S-video input Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
Video input Vp-p=1.0 V 75 Ω (negative sync)
Component video
input YC
B
C
R
: Vp-p=1.0 V 75Ω (Y) (negative sync)
Vp-p=0.7 V 75 Ω (C
B
, C
R
)
Analog input RGB: Vp-p=0.7 V 75 Ω (negative sync)
YC
B
C
R
: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (C
B
, C
R
)
HD/CS: TTL-level (negative or positive polarity)
VD: TTL-level (negative or positive polarity)
Digital input (HDMI) HDMI interface (TMDS single link)
Specifi cations
334
85
125
7
128
54
352
HDMI IN-2 HDMI IN-1 SERIAL COMPUTER IN/ COMPONENT VIDEO IN VIDEO IN
S-VIDEO IN
PR/
CR
PB/
CB
COMPONENT VIDEO IN
AC IN
HDMI IN TRIGGER
Dimension drawings (unit: mm)