Metz Ibiza SF 63TG62 - Manual (Page 8)

8
3. Presetting TV stations
In the sub-menu Standard, you can select the colour and/or the transmission standard. The TV set normally recognises the colour stan-
dards (PAL, SECAM, NTSC) automatically, but the transmission standard must always be set manually. The multi-standard upgrade kit is
required for the additional transmission standards L, I, D/K and NTSC 4.43. In exceptional cases, the colour standard may not be recogni-
sed; if this happens, you must set it as described below.
Example:
The colour standard „NTSC“ is to be set.
Press this key on the remote
control....
The screen displays Explanation
Programme Std Pict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
6 0 0 + 0 3 K - G B
VTR1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
TV station table
—
—
—
—
Sound
—
—
—
—
Standard B/G
Colour standard Automatic
? MENU return Help TV picture
Programme Std Pict.
▲▼
<< weitere Einstellungen
Logo, Channel, Signal
VTR1
ARD
ZDF
SAT 1
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
Auto.
0
1
2
3
4
5
6
7
8
9
TV station table
—
—
—
—
Sound
—
—
—
—
Standard B/G
Colour standard NTSC
? MENU return Hel TV picture
The automatic function of the submenu „Standard“ is
preset in the factory.
The settings PAL, SECAM and NTSC need to be selected
manually only if the automatic detection function does
not recognize the colour standard correctly.
☞
The transmission standard must always be set
manually.
The various standards can be selected with the
keys.
In this example, the transmission standard NTSC is
selected.
The multi-standard upgrade kit 031 NC 1030 (optional
extra) is required for the reception of the transmission
standards L, I, D/K and NTSC 3,58.
+ -
Colour and transmission
standards
OK
TV
1. Call submenu „Standard“
2. Select the transmission
standard or colour standard
(e.g. standard I)
3. Store the settings and
return to the TV picture
red
yellow
white
white
+ -
store ?
OK