MITSUBISHI ELECTRIC XD2000 - Manual (Page 38)

EN-38
Specifi cations
The specifi cations and outside appearance of the projector are subject to change without prior notice.
*1 : Wireless LAN unit isn’t packaged together with the projector.
Replacement part
(Option / Not included in the box)
Spare lamp (VLT-XD2000LP)
Type
Model
Display Technology
Projection lens
Light-source lamp
Image size (Projection distance)
Maximum
resolution
Computer signal
Video signal
Component
signal
Computer/Component video input
Video input
Audio input
Monitor output
Audio output
Speaker
Control terminal/Others
Operating temperatures
Rated voltage
Power consumption
Dimensions (Not including protrusion)
Weight
Others
S-video input
Video input
Analog input
Digital input (DVI)
Audio input
DC OUT
DLP™ projector
XD2000U/XD1000U
0.7-inch Single chip DMD
Pixel 1024 x 768 = 786432 pixels
F 2.0 - 2.4 f= 24.5 - 33.1 mm
300 W
40" min. to 300" max. (Projection distance 1.4 to 10.6 m)
Maximum resolution : 1280 x 1024 dots (Analog) / compressed
Panel resolution : 1024 x 768 dots
NTSC / PAL / SECAM / NTSC 4.43 / PAL-M / PAL-N / PAL-60
480i, 480p, 576i, 576p, 720p, 1080i
Panel resolution : 1024 x 768 dots
[Signal type]
[Terminal type] [Line]
Analog RGB Mini D-SUB 15-pin 1
Analog RGB 5BNC 1
Digital RGB DVI 1
[Signal type] [Terminal type] [Line]
Video input RCA/BNC 1
S-Video input S/2BNC 1
[Signal type] [Terminal type] [Line]
RGB/Component Stereo mini jack ( ø3.5) 2
Video RCA (L, R) 1
S-video RCA (L, R) 1
[Signal type] [Terminal type] [Line]
Analog RGB Mini D-SUB 15-pin 1
[Signal type] [Terminal type] [Line]
RGB/Component Stereo mini jack (
ø3.5) 1
3 W Mono Round type ø5 cm x 1
RS-232C (D-SUB 9-pin), USB, LAN (RJ-45), REMOTE IN/OUT
+41°F (+5°C) to +104°F (+40°C)
AC100 - 240 V, 50/60 Hz
4.2 A
430 mm (W) x 166 mm (H) x 330 mm (D) (Projector only)
430 mm (W) x 166 mm (H) x 425 mm (D) (Including the terminal cover)
8.5 kg (Projector only) , 8.8 kg (Including the terminal cover)
Luminance signal : Vp-p=1.0 V 75 Ω (negative sync)
Chrominance signals : Vp-p=0.286 V 75 Ω (burst signal)
Vp-p=1.0 V 75 Ω (negative sync)
RGB : Vp-p=0.7 V 75 Ω (negative sync)
YC
B
C
R
: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (C
B
, C
R
)
HD/CS : TTL-level (negative or positive polarity)
VD : TTL-level (negative or positive polarity)
DVI-D interface (TMDS single link) with HDCP
350 mVrms, 10 kΩ or more
5 V 1.5 A (max) (For wireless LAN unit
*1 )