M&S Systems MC602 User Manual

Page 6

Advertising
background image

8

The function is turned on by pushing both the VOLUME UP and VOLUME DOWN
buttons at the same time and holding them for 4 seconds.

10 & 11. OPTIONAL SECURITY INTERFACE - always active. If the system is
connected with a SECURITY system the VOLUME UP button and VOLUME DOWN
button are used to activate the panic alarm. The panic alarm is turned on by pushing
both the VOLUME UP and VOLUME DOWN buttons at the same time and holding
them for 4 seconds.

12.

ROOM TALK button - always active. This button is used for communicating

with the other rooms. To talk to someone in another room hold the ROOM TALK
button in while talking in the direction of the microphone. The display will show that
you are in the talk mode. Release the ROOM TALK button when you are finished
talking.

NOTE: When talking to a person in another room, you will be heard at each speaker
that is in the RAD/INT, or INT position (See section 18).

13.

ROOM LISTEN button - always active. This button is used for listening to

the other rooms. To listen to other rooms hold the ROOM LISTEN button in. The
display will show that you are in the listen mode. Release the ROOM LISTEN button
when you are finished listening.
NOTE: To get the maximum benefit from this Hands Free system, make it a house
rule that whoever initiates a call will always follow up by pressing the ROOM LISTEN
button. This allows someone to respond to the call without getting up or stopping their
current activities.

NOTE: When listening to other rooms, you will hear each speaker that is in the
MONITOR, RAD/INT, or INT position (See section 18).

12 & 13. DOOR TALK - always active. These buttons are used for communicating
with the outside door speaker(s). To talk to someone at the door speaker(s) hold the
ROOM LISTEN and ROOM TALK buttons in while talking in the direction of the
microphone. The display will show that you are in the talk mode. Release the ROOM
LISTEN and ROOM TALK buttons when you are finished talking--the MC602 will
automatically listen (you will hear what is being said) to the person at the door(s) for
approximately 25 seconds. The display will show that you are in the listen mode.
You may talk to the person at the door again anytime by holding in the ROOM
LISTEN and ROOM TALK buttons. Each time the buttons are released, the door
speaker(s) can be listened to for another 25 seconds. If you are done communicating
with the person at the door and/or you do not want to listen to the door speaker, the
25 second listening time can be canceled by momentarily pressing either the ROOM
LISTEN or the ROOM TALK button by itself.

9

NOTE: When communicating with the person at the door(s), both sides of the
conversation will be heard at each speaker that is in the RAD/INT, or INT position
(See section 18).

14.

BASS CONTROL - Recommended setting:12:00. This CONTROL is used

to adjust the low tones of the audio heard on all the speakers (room speakers as well
as the MASTER SPEAKER). Turning the BASS CONTROL clockwise increases the
bass (makes the low frequencies louder) and turning it counter-clockwise decreases
the bass (makes the low frequencies quieter).

15.

TREBLE CONTROL - Recommended setting: 12:00. This CONTROL is

used to adjust the high tones of the audio heard on all the speakers (room speakers
as well as the MASTER SPEAKER). Turning the TREBLE CONTROL clockwise
increases the treble (makes the high frequencies louder) and turning it counter-
clockwise decreases the treble (makes the high frequencies quieter).

16.

INTERCOM VOLUME CONTROL - Recommended setting: 12:00. This

CONTROL is used to adjust the level of the intercom communications. Turning the
INTERCOM VOLUME CONTROL clockwise increases the volume of intercom
communications and turning it counter-clockwise decreases the volume. The
INTERCOM VOLUME CONTROL should be set to a point where intercom
communications can easily be heard, but not so high that the speakers feedback or
squeal when communications are attempted.

17.

MASTER SPEAKER VOLUME CONTROL - Recommended setting:

Maximum. This CONTROL is used to control the volume of the MASTER SPEAKER.
Turning the MASTER SPEAKER VOLUME CONTROL clockwise increases the
MASTER SPEAKER volume and turning it counter-clockwise decreases the MASTER
SPEAKER

volume. The MASTER SPEAKER VOLUME CONTROL should be normally be set to
maximum (fully clockwise) and the VOLUME UP and DOWN buttons should be used
to adjust for the proper listening volume. If however, another room needs more
volume than the MASTER SPEAKER, the MASTER SPEAKER VOLUME CONTROL
may have to be turned down somewhat and then the music volume increased with the
VOLUME UP button to get the perfect volume in each room.

18.

INTERCOM SELECTOR SWITCHES These switches are used to control

the operation of the Room Speaker in each corresponding room.

The MASTER SPEAKER Switch controls the MASTER SPEAKER.
The ROOM SPEAKERS Switches 1 through 9 control the corresponding Room
Speakers.
The PATIO SPEAKER Switch controls the Patio Speaker(s).

Advertising