Miele G2182 - Manual (Page 12)

Adjusting the dosage
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 0 to 6.
– Use a higher setting if spots appear
on dry glassware.
^ Use a lower setting if streaking
appears on dishes or glasses.
^ Turn the dishwasher off "V".
^ Press and hold the "Program" button
and at the same time turn the
dishwasher on
g.
Hold the "Program" button until the
indicator comes on.
If it does not come on start over.
^ Press the "Program" button three
times.
The "Intake / Drain" indicator flashes
three times in intervals.
The "SaniWash" indicator flashes 3
times in intervals.
The rinse aid dosage is adjusted to
3 ml by default.
The amount set can be recognized by
the flashing rhythm of the "SaniWash"
indicator (see table):
Dosage in ml Flashing rhythm
0 -
1 Once
2 Twice
3 3 times
4 4 times
5 5 times
6 6 times
^ Press and hold the "Program" button
until the "Intake / Drain" indicator
lights up.
^ Select the desired setting with the
"Program" button. Every touch of the
button increases the level.
The programmed dosage is saved.
^ Turn the dishwasher off "V".
Before using for the first time
12