C. usb connection – Motorola SURFBOARD SBG1000 User Manual
Page 8
8
Wireless Cable Modem Gateway SBG1000
C. USB Connection
You can connect one PC running Windows
98, Windows Me, Windows 2000,
or Windows XP to the SBG1000 USB port. The USB connection requires
special driver software supplied on the SBG1000 Installation CD-ROM.
1
Insert the SBG1000 Installation CD-ROM into the CD-ROM drive. Be sure
the SBG1000 is not connected to your PC.
2
Connect the SBG1000 to the cable TV system as described in Section A.
3
Install the USB driver software and restart your PC.
4
Connect the USB cable to the USB port on the SBG1000. Connect its other
end to the USB port on the PC.
RESET
5
4
3
2
1
If you experience problems with the USB connection, uninstall the USB driver
following the instructions in the SBG1000 User Guide.