Mattel UCREATE N9496 - Manual (Page 6)

8
Effect Name Right / Left Up / Down BPM Description
LPF (low pass
filter)
cutoff frequency resonance 4 pole low pass
filter.
Distortion drive filter cutoff Ubiquitous on
guitar, good
on bass, vocal,
adds warmth
and harmonics
to anything.
Tremolo Depth Volume Modulation rate Modulates
amplitude at
beat rate. Adjust
overall volume.
Distortion Rocker
Press down then move the Distortion Rock to change the right/left, up/down value of each FX &
Filter. This will only affect Linked Loops. DJ NOTE: Audio In and Mic In are always linked! Connect
an external microphone to sing and distort your voice in real time.
Record the Song
If you like what you’ve got laid down, record it into a song up to 2 min and 30 sec long.
- Press the “Record Song” button.
DJ NOTE: You will hear 4 drum stick clicks then the recording
will start
- You can continue to play or mute loops, add new FX and filters, speed up or slow down the speed,
or distort with the Distortion Rocker.
- Press the “Record Song” button again when you are done. DJ NOTE: Plan your big finish! When
15 seconds is remaining, the Record Song button will flash at an increased rate. At 5 seconds
remaining, it will increase again.
Listen to your Song
You can play back your recorded song by pressing the Play Song button. DJ NOTE: While your song
is playing back, all functions will be disabled except Play Song. Press play song again to stop the
song. Note: Pressing “Record Song” will replace your song.
Rock the House
Connect speakers or head phones to UCreate Music to really get the party started!
- Connect head phones to listen privately and practice.
- Connect to external speakers for louder music to share with friends.
- Plug either of these items into the Audio Out jack
Adjust the Touch Panel
If the touch panel is not functioning properly, you can adjust the sensitivity. Press and Hold
BPM then press Play Song. The Distortion Rocker will flash. Press BPM + to increase or BPM -
to decrease sensitivity of the non LED touch areas. Press Play Song again to exit.
Press and Hold BPM then press Record Song to adjust the LED touch areas. The touch areas
will turn on. The Distortion Rocker will flash according to sensitivity. Use BPM +/- to adjust. Press
Record Song to save and exit.
UCreate Music Software
Your UCreate Music mixer comes with one “Pack” preloaded onto it, but there will be more that you
can download by creating a UCreate Account! Here is how you can expand the amazing features of
the UCreate Music mixer.
9