Maxtor MaxAttach NAS 4000 Series - Manual

MaxAttach NAS 4000 Series Quick Start Card
Thank you for choosing a Maxtor MaxAttach™ NAS 4000 Series file server. Take a moment to verify the
contents in your box and note the serial number of your MaxAttach for future reference. The procedures out-
lined here assume that you are familiar with networking and system administration basics. If not, please refer to
the Installation and Configuration Guide on the enclosed MaxAttach NAS 4000 Series CD.
Box Contents
• MaxAttach NAS 4000 Series file server
• Quick Start Card
• MaxAttach NAS 4000 Series End User License Agreement
• Power cord
• CAT-5 Ethernet cables (2)
• Mounting ears (2) with screws
• Rubber feet (4)
• MaxAttach NAS 4000 Series CD containing:
• MaxNeighborhood™ Setup and Discovery Wizard
• MaxAttach NAS 4000 Series documentation
• 1Safe™ for MaxAttach client backup software CD
Unit Information
Please record the following information:
Model Number:________________________________
Serial Number:_________________________________
System Requirements
It will be necessary for your workstation to have the following:
•
Windows 95/98/Me/NT(SP5)/2000
• Internet Explorer v5.01 SP1 or above
• Network Interface Card (NIC)
• Client for Microsoft Networks enabled over TCP/IP
• CD-ROM Drive