Morphy Richards 2 slice polished chrome toaster - Manual (Page 3)

3
Electrical requirements
Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating Current).
For appliances supplied with fitted plug
If the socket outlets in your home are not suitable
for the plug supplied with this appliance, the plug
should be removed and the appropriate one fitted.
Note: The plug removed from the mains lead, if
severed, must be destroyed as a plug with bared
flexible cord is hazardous if engaged into a live socket
outlet.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
Should the fuse in the 13 amp plug require
changing a 13A BS1362 fuse must be used.
Features of your toaster
⁄ Electronic variable browning control
¤ Cord storage
‹ Cancel button with neon
› Frozen bread button with neon
fi Re-heat button with neon
fl Bread carriage lever/hi lift for small items
‡ Removable crumb tray
· Variable width bread slots
Instructions for use
1 Before plugging in ensure that the carriage lever
fl is positioned as the above diagram.
2 Use your toaster once without bread. This will
pre-heat the new elements and burn off any dust
which may have accumulated during storage.
3 Select the desired level of
browning on the browning
control
⁄ marked 1 to 8. The
setting will vary according to the
moisture content and thickness of
bread. For best results ensure
that the bread slices are of even
thickness, freshness and size.
However, the variable width bread slots will accept
thicker or thinner bread than a conventional
toaster. Remember that stale bread toasts more
rapidly than fresh and thin bread toasts quicker than
thick. See additional points for more information.
4 After selecting the desired level, place your bread in
the slots and depress the bread carriage lever fl
downwards until it locks.
Note: The bread carriage lever will not stay down unless
the toaster is plugged in and wall switch is on.
5 After the desired degree of brownness has been
reached the bread will pop-up automatically ready
for removal from the slots. The bread carriage
lever will have returned to its upper position and
disconnected the element, ready for the next
toasting.
• If the first slices are not dark enough turn the
browning control to a higher setting.
• If the bread in your toaster becomes jammed
disconnect your toaster at the socket, allow it to
cool, then remove the bread.
• When not in use, switch your toaster off at the
mains and remove the plug from the socket. DO
NOT WRAP THE CABLE AROUND THE MAIN
BODY OF THE APPLIANCE DURING OR
AFTER USE.
Using the cancel setting O
When the bread carriage lever is depressed, the
cancel button ‹ will illuminate. If you wish to
interrupt the toasting process, press the cancel button.
Using the frozen bread button X
To toast frozen bread, do not adjust the browning
control, place the bread normally in the bread slots,
depress the bread carriage lever and press the frozen
bread button
›. The button will illuminate and the
toaster will automatically toast for an extended period.
Please read before use, taking careful note
of points 1 to 3
›
·
‡
¤
⁄
‹
fl
fi