Miller Electric DS-75S16 - Manual (Page 15)

OM-230 300 Page 11
4-4. Installing Wire Guide Extension
ST-152 383
1 Wire Guide Fitting
2 Bolt
3 Monocoil Liner
4 Wire Guide Extension
Tighten bolt to secure liner in wire
guide fitting. Do not overtighten bolt
and crush liner.
Repeat procedure for opposite
side.
Tools Needed:
1
2
3
4
3/8 in
4-5. Installing Guard
804 783-A
1 Motor Mounting Bracket
2 Mounting Screws
Remove 4-screws from motor
mounting bracket.
3
Guard
Secure guard using 4 screws pre-
viously removed. For standard
speed motor mount guard use
mounting holes as shown.
Tools Needed:
1
2
3/8 in
3
This illustration shows the mounting
screws in place for a standard speed
motor. The remaining holes are used for
low speed motors.