MoistAir MA 0950 - Manual (Page 10)

5. Install a new filter (MAF-1) into the
base. Coil the filter and position it
between the uprights in the bottom of
the base. The start and finish of the
coil should be captured at the center
of the base (see diagram) and the fil-
ter should be resting on the floor of
the base.
6. Return the housing assembly to the
top of the base. Return the water bot-
tle to the right of the housing assem-
bly and reposition the humidifier to its
operating position.
7. The humidifier is now ready to be
filled for operation.
Replacement and Care of Filters (continued)
10
Base
Position start
and finish of
coiled filter at
center of base.
Align housing
assembly
bottom with
top of base
and reposition
securely.
Return bottle
to right side
of humidifier.
Base Uprights
SP6549 Manual 71235 7/12/05 3:17 PM Page 10