Mvix MV-5000U - Manual (Page 35)

35
MV5000U & MV4000U
MviX Multimedia Player
Troubleshooting
Problem Solution
The Multimedia Player does not r
espond to the remote control
– Aim the Remote Control directly at the sensor on the
front of the player.
– Reduce the distance to the media player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/–signs) as
indicated.
Buttons do not work
– To completely reset the player, unplug the AC cord
from the AC outlet for 5-10 seconds.
No Power
- Check if the AC power cord is properly connected.
– Press the Power button on the front of the Multimedia
Player to turn on the power.
No Picture
– Refer to your TV’s manual for correct Video-In channel
selection. Change the TV channel until you see the media
player screen.
– Check if the TV is switched on.
No sound or distorted sound
– Adjust the volume.
– Check the audio cables and make sure both are connected
secured to the TV or Stereo Audio In jacks.
WARNING
Under no circumstances should you try to repair the system
yourself, as this will invalidate the warranty.
Do not open the system as there is a risk of electric shock.