Morphy Richards 28026 - Manual (Page 4)

4
3 Press the mode button (8) 6 times. The unit will be at world time setting mode.
Choose the city you want to review, e.g. LAX Los Angeles. Press the Snooze button
(7) once. The DST symbol will appear. One hour will be added onto the world time.
Please note that this action will only affect that particular time zone, i.e. LAX time. It
will not change your local real time, i.e. LON.
Battery back-up facility
(unit will work without a battery being fitted)
1 Remove the battery compartment cover (located underneath the unit) by
pushing in the clip and lifting off.
2 Insert a 2 x AAA batteries and connect to terminals (Ensure batteries are inserted
correctly)
3 Replace the battery compartment cover.
Should a power interruption occur the clock will continue to run, however, time
keeping will not be accurate.
If the optional battery is not installed in case of the AC power failure, the clock will go
through the automatic msf setting. You will need to reset the alarm when power is
restored.
Battery back-up is designed to operate for a short period only.
If the unit is not to be used for a prolonged period, remove the battery to avoid
battery leakage.
In the interests of environmental safety : dispose of batteries safely.
Radio controlled clock (automatic clock) operation
Once you plug in the power cable and install the back-up batteries in the battery
compartment (2).
1
All the segments go solid for 2 seconds (LCD panel back-light will come on
automatically).
2 The letters “LON” and the rc signal receiver symbol will flash.
3 After a few seconds the display will show “— : — “ with the second section “00”.
4 When the RC signal has been received and decoded successfully, the second
section starts counting up. The real time clock is updated by the
signal which
goes solid and immediately switches to the Auto Run Mode.