M&S Systems MNCXS - Manual (Page 7)

Ceiling Mounting System
Page 10 MNCX/MNCXS Owners Manual M&S Systems Page 7
2. Pull the ball/shaft (C) out of the wall bracket (D).
3. Slide the molded nut (B) onto the ball/shaft (C) with
threaded opening facing the ball, and thread on the
metal nut (A) all the way onto the ball/shaft (C) with the
nut’s (A) “knurled” surface facing away from the ball.
4. Screw the ball/shaft (C) into the threaded insert on the
back of the speaker cabinet (F) until it is fully seated
against the bottom of the insert. Please refer to page 9
for information on mounting your speakers on the
ceiling.
Wall Mounting System
5. Insert the ball/shaft assembly (C) through the hole on the
bracket (N). Then place the locking nut (P) on the
ball/shaft assembly with the “knurled” surface toward the
bracket.
6. Feed the speaker wire through hole (M) on the wall
bracket (D).
7. Follow Step 7 under “Mounting Your Speakers”.