MITSUBISHI ELECTRIC DIS710E - Manual (Page 14)

14
6. PICTURE QUALITY ADJUSTMENT
ADJUSTING PICTURE QUALITY
To adjust the image source first is the key to get maximum
picture quality.
2 2 2 2 2
CAMERA ADJUSTMENT
Always adjust the camera setting first. Only after you are sure
that the camera is providing the best picture quality and colour
balance, adjust the printer setting.
Make sure to adjust the camera setting in the same condition
which you actually take a picture.
For Iris setting, see the table shown right.
2 2 2 2 2
ADJUSTING THE BRIGHTNESS OF IMAGE (IRIS)
1 1 1 1 1
Press SHOT button to take a picture.
2 2 2 2 2
Press IRIS button.
IRIS adjustment mode is selected.
3 3 3 3 3
Press UP or DOWN button to select MANUAL.
4 4 4 4 4
Press SET button.
The set value is flashing. Change the set value with UP or DOWN
button.
If the image is too dark, set the larger value.
If the image is too light, set the smaller value.
5 5 5 5 5
Press SET button.
6 6 6 6 6
Press ZOOM button to finish the iris setting menu.
SHOT
MANUAL
0
MANUAL
-20
IRIS
Too dark Too light Good
Relation Distance for taking picture, Guide No., F number
Guide
No.
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
Distance (m)
1 1.5 2 2.5
F IRIS
16 -24
22 -28
32 -30
F IRIS F IRIS F IRIS
8 -17
11 -20
16 -24
22 -28
32 -30
16 -24
8 -17
11 -20
22 -28
5.6 13
8 -17
11 -20
16 -24
22 -28