Marking a position using the plotter cursor, Points of interest 27 – Magellan eXplorist 100 User Manual
Page 32
Advertising
Marking a Position using the Plotter Cursor
This gives you a way of marking a position, other than your present position, by moving the
cursor around the plotter to a place where you want to create a POI.
1.
While viewing the
Plotter
screen, use the Arrow joystick to put the eXplorist into
Cursor mode.
2.
Continue moving the crosshair cursor until you are over the location where you want
to add a POI.
3.
Press MARK.
4.
[Optional] Use the Arrow joystick to highlight fields (icon, name, etc.) of the POI
that you want to edit. When you are done editing the field, press ENTER.
5.
With
Save highlighted, press ENTER.
6.
Press ESC to exit the Cursor mode and return to the Position mode.
Points of Interest
27
Advertising