Midland Radio GXT800 - Manual (Page 12)

®
Page 12 www.midlandradio.com
SETTING THE RADIO TO GROUP MODE
To turn the GROUP MODE on, press the MENU button until the
display shows “Gr” blinking, while an “oF” appears on the right of the
display. Select “on” by pressing the buttons and press the PTT
button to confrim or press MENU button again to move to the next
feature setting.
When the radio is in GROUP MODE the Group Mode icon will appear
on the display.
SETTING GROUP CODES
Your GXT800/850 Series has 142 Group Codes available. To select
a Group Code press the MENU button while in Group Mode until the
Privacy Code blinks, and then the buttons to select one of the 142
Group Codes. The Privacy Code icon on the display will indicate your
Group Code setting. To confirm the selection, press the PTT button or
press MENU button again to move to the next feature setting.
SETTING THE ID NUMBER
Your GXT800/850 Series has 10 ID Number available. The selected
ID NUmber may be different for each Group Code. To select an ID
Number for the current Group Code press the MENU until the display
shows “Id”, while the current ID number setting appears blinking on
the right of the display. Press the buttons to select one of the 10
ID Numbers. To confirm the selection, press the PTT button or press
MENU button again to move to the next feature setting.
SETTING THE CALLER ID NUMBER
You can select your individual 4-digit Caller ID Number to indicate you
when making “direct call” to other radios within your group. To set
your Caller ID Number within the current channel, Group Code and
ID number press the MENU button while in Group Mode 5 times, and
then press the buttons to select “1 ~ 9” on each digit. To move to
another digit press the MON/SCAN button. To confirm the selection,
press the PTT button or press MENU button again to move to the next
feature setting.
Model GXT800/850 Series
/
/
/
/