Multitech MULTIMODEMII MT5600BAV.90 - Manual (Page 10)

10
Chapter 2 - Installation
MT5600BA/BL Series User Guide
Step 3: Country Code Configuration
(MT5600BA–V.92 Only)
The MT5600BA-V.92 modem is a global modem - it can be used all over the world.
Different countries have different requirements for how modems must function. Therefore, before you can
use your modem, you must configure it to match the defaults of the country in which you are using it. You
can use one of two configuration methods:
·
Using the Global Wizard to Configure Your Modem
·
Using AT Commands to Configure Your Modem
Using the Global Wizard
The Global Wizard configuration utility is recommended for computers running in Windows. The
Wizard can configure your modem for a specific country with just a few mouse clicks.
1. Insert the MultiModemII system CD into the CD-ROM drive. The Autorun dialog box
appears.
2. Click Initial Setup and Country Selection. The Global Wizard dialog box appears. Click
Next.
3. The Global Wizard searches for your modem and identifies it. Click Next after your mo-
dem is identified.
4. Select the country in which the modem will be used. Click Next.
5. Review your choice of country. If it is correct, click Next to configure the modem.
6. When the Global Wizard announces that the parameters have been set, click Finish to
exit.
Using AT Commands
If you are comfortable using AT commands, you use them to configure your modem. You must
enter these commands in your communication program's terminal window (a program such as
PhoneTools). Execute the following AT commands:
Type AT+GCI= nn (nn stands for the country code). Press Enter.
OK displays.
Type AT&F&W to save your country code. Press Enter.
OK displays.
Type ATI5 to verify your country code has been configured.
The country code is then displayed in hexadecimal format as in this example:
Country Hexadecimal Code
Euro/NAM B5
Note: See Multi-Tech's Web site for a list of country codes. Go to www.multitech.com.