Musical Fidelity X-AS100 - Manual (Page 4)

Instructions For Use. Page 4
X-AS100
INSTALLATION
INSTALLATION PRECAUTIONS
Your new X-AS100 is designed and built to provide trouble-free performance but as
with all electronic devices it is necessary to observe a few precautions. Please ensure
that you have complied with them before you connect any AC power to your ampli-
fier. Retain this guide for future reference.
þ Heed all warnings on the back of
the unit.
ю ю
Place your X-AS100 where there
is adequate ventilation.
ю ю Only connect the unit to a power
supply of the type marked on the back
of the unit.
ю ю
Position the power supply lead
and signal interconnect leads where
they are not likely to be walked on or
trapped by items placed on them.
э э Do not use near water.
э э
Do not place the amplifier near
direct heat sources such as radiators
or other equipment that produces
heat.
э э Do not remove any covers or try
to gain access to the inside. The war-
ranty will be invalid if the unit has
been tampered with. There are no
user adjustments within. Refer all
service work to an authorised Musical
Fidelity agent.
э э
There are fuses in the X-AS100.
In the unlikely event that one blows,
take your X-AS100 to your audio
dealer. Do NOT try to replace the fuse
yourself or you will invalidate the
warranty.
BEFORE YOU SWITCH ON
You should make all connections to the X-AS100 before switching on.
Follow this routine before you listen for the first time, and each time you change any
connections.
1 Check all the inputs and outputs to the X-AS100.
2 Then check again.
3 Turn the volume control to nil.
4 Now you can switch on the power and carefully advance the volume to
the level you want and enjoy the music.