Miele ESW 4811 - Manual (Page 30)

Integrated installations
Models 4701 FB and 4801 FB
Custom made front panels can be
installed with models 4701 FB and
4801 FB.
Panel dimensions
4701 FB
Width 27
3
/
8
" (695 mm)
Height 11" (279 mm)
4801 FB
Width 29
13 /
16
" (757mm)
Height 11" (279 mm)
The custom panel must be at least
3
/
8
"
(10 mm) thick and made of heat resist-
ant material 140 °F (60 °C).
a Install a handle to the custom front
panel using counter sunk screws.
b Remove the drawer from the casing.
See "Removing the drawer".
The panel attached to the warming
drawer front can be used as the drilling
template for the custom panel.
c Loosen the two screws on the inner
side of the drawer and remove the
panel from the appliance front.
d Place the panel on a firm surface
with the adhesive tape facing up.
Peel the backing from the adhesive
tape.
e Position the custom panel over the
removed panel using the tape to
hold it in place.
Installation
30