Miller Electric PRO 300 - Manual (Page 5)

5
Adapter Cord, Full KVA #300 158 Field
NEMA 14-50P to NEMA 6-50R. Adapts
engine drive 120/240 V plug to common
Millermatic
® and Spectrum ® 240 V plug.
Full KVA Plug Kit
#119 172 Field
120/240 VAC, 50 amp plug
(NEMA 14-50P) to fit full
KVA receptacle.
Cold Weather Starting Aid #195 056 Field
120 V block heater.
Note: All models come standard with preheaters
(glow plugs).
Spark Arrestor (Muffler) Kit #195 291 Field
Prevents particles from leaving the muffler
that could potentially start a fire. Mandatory
when operating on California grasslands,
brush, or forest-covered land, and all national
forests. For other areas, check your state
and local laws. Meets U.S. Forest Service
Standard 5100-1B.
FA-1D Lockable Flame
Arrestor Fuel Cap #043 947
Fuel cap can be padlocked to
prevent vandalism. A built-in
flame arrestor prevents
flames or sparks from
entering the fuel tank.
Protective Cover #195 301 Field
Blue water-resistant cover with Miller logo
resists stains and mildew, and protects the
finish of your welder.
Stick (SMAW) Welding
Weld Leads
#173 851 2/0, 350 A, 100% duty cycle,
50 ft stinger, 50 ft work cable
#043 952 2/0, 300 A, 100% duty cycle,
100 ft stinger, 50 ft work cable
Plasma Cutting
Spectrum ® 375 X-TREME ™ #907 303
Spectrum ® 375 X-TREME ™ with X-CASE ™
#907 339 (not shown)
See Lit. Index No. PC/9.2.
Spectrum
® 625 #907 058
See Lit. Index No. PC/9.5.
Spectrum 2050 #903 777-01-2
See Lit. Index No. PC/7.0.
MIG (GMAW) or Flux Cored (FCAW)
Millermatic ®
Passport ® Plus
#907 401
Portable, all-in-one MIG
package features ultimate
arc performance, self-
contained gas bottle,
and flexibility to plug into 115 or 230 V
power with Miller exclusive Multi-Voltage
Plug. See Lit. Index No. DC/12.53.
SuitCase ™ X-TREME ™ 8VS Wire Feeder
#300 093
SuitCase
™ X-TREME ™ 12VS Wire Feeder
#195 500
Lightweight, voltage-sensing wire feeders
include secondary contactor and gas valve.
Require drive roll kit. See Lit. Index No.
M/6.41.
SuitCase ™ 8RC Wire Feeder #194 938
SuitCase ™ 12RC Wire Feeder #194 940
Lightweight and flexible enough to run a
variety of wires up to .062 in diameter.
Comes standard with remote voltage
control. See Lit. Index No. M/6.5.
MIG (GMAW)/Flux Cored (FCAW) Guns
Miller produces a com plete line of
dependable MIG guns. See Lit. Index Nos.
AY/15.0, AY/16.0 and AY/17.0.
Spoolmatic ® 30A
Spool Gun
#130 831
Air-cooled, 200-amp,
1-lb spool gun for
aluminum MIG. See Lit. Index No. M/1.73.
WC-24 Control #137 549
Use with Spoolmatic 30A.
XR ™ Wire Feeders and Guns
Push-pull system designed to handle
difficult-to-feed soft alloy wires such as
aluminum. See Lit. Index No. M/1.7,
M/1.71, and M/1.73.
TIG (GTAW) Welding
HF-251 Series #042 388
HF-251D-1, 115 VAC
High-frequency arc
starter and stabilizer. See
Accessory Lit. Index No.
AY/5.0.
Multiple Operator Welding
The XMT 304, CST 280 and Dynasty 200
power sources can be run off the machine’s
generator to provide two arcs with only one
engine. There is no arc interaction under
180 amps.
XMT ® 304
#903 471 and
#903 471-01-1 only
See Lit. Index No. DC/18.8.
CST ™ 280
#907 244, #907 244-01-1
#907 251, #907 251-01-1
See Lit. Index No. DC/29.55.
Dynasty ® 200
Series
#907 099
#907 099-01-1
See Lit. Index
No. AY/4.8.
Genuine Miller Accessories
Female
Receptacle