Metrologic Instruments MS3780 - Manual (Page 31)

27
D ESIGN S PECIFICATIONS
MS3780
Operational
Light Source: Visible Laser Diode (VLD) @ 650 nm
Laser Power: 1.1 mW (Peak)
Normal Depth of Field: 25 mm - 280 mm (1”- 11”)
Reduced Depth of Field: 25 mm - 150 mm (1”- 6”)
0.33 mm (13 mil)
bar code
Omni Scan
Scan Speed: 1333 scan lines per second
No. of Scan Lines: 20
Single-Line
Scan Speed: 67 scan lines per second
No. of Scan Lines: 1
Motor Speed: 4000 RPM
Min Bar Width: 0.127 mm (5.0 mil)
Decode Capability:
All standard 1-D bar codes including RSS-14,
RSS-Expanded, and RSS-14 Limited
System Interfaces:
RS232, Keyboard Wedge, Stand-Alone Keyboard, Light Pen
Emulation, IBM468x/469x, USB (low speed and full speed),
OCIA
Print Contrast: 35% minimum reflectance difference
No. Characters Read:
Up to 80 data characters
Maximum number will vary based on symbology and density.
Beeper Operation: 7 tones or no beep
Blue = laser on, ready to scan
Indicators (LED):
White = good read, decoding
Termination: 10 position modular RJ45 connector
Cable: Application Dependent
Mechanical
Scanner Length: 189 mm (7.44”)
Scanner Width: 65 mm (2.56”)
Scanner Height: 73 mm (2.88”)
Scanner Weight: 195 g (6.9 oz.)
Specifications subject to change without notice.