Morphy Richards EB75310 - Manual (Page 5)

4 H Heellpplliinneess:: 00884455 007777 77770000 ((U UK K)) 11880000 440099 111199 ((R Reeppuubblliicc ooff IIrreellaanndd))
BEFORE USE
Before using this appliance,
ensure that the voltage indicated
on the product corresponds
with the mains voltage in your
home. If you are in any doubt
about your supply, ask your
electrical dealer or local
electricity company.
WARNING: Do not attempt
to use the blanket with
controls other than those
supplied with the unit, as
referred to on the rating
label attached to the
blanket.
Dual control models
On double dual models, users
are able to control their own
side of the bed with individual
controls, tailoring independent
temperatures to independent
needs.
Each side of the blanket has a
completely separate element
and each is supplied with it’s
own independent mains lead.
A 13amp plug on each lead is
essential.
Do not connect both flexible
cords to one 13amp plug.
The two leads should preferably
be plugged into individual
sockets. However, if only one
socket is accessible, then a dual
adaptor should be used.
WARNING: Only the electric
blanket should be
connected to the dual
adaptor. If you are unsure,
please contact a qualified
engineer.
It is quite normal for the switch
to become warm as the
components encased are part
of the protection circuit.
SAFEGUARD
OVERHEAT
PROTECTION
SYSTEM
Activation
The system will remain dormant
indefinitely as long as the
blanket is operating in the
normal temperature range. If, for
any reason, the blanket is
operated in an abnormal
situation or condition which
would otherwise have induced a
rapid temperature rise high
enough to constitute a hazard,
the OVERHEAT SYSTEM should
intervene by cutting off the
supply current before the
temperature reaches the point at
which damage may occur.
It is normal for the lead from the
blanket to the switch to become
warm as this is part of the
heater protection circuit
extended to the switch.
In the event of the OVERHEAT
SYSTEM operating, the blanket
will cease to function.
WARNING: No attempt
should be made to repair
the blanket or have it
repaired locally. The switch
supplied must never be
replaced since the
specialised components are
not generally available.
The fact that this blanket
incorporates the overheat
system does not absolve the
user from observing these
instructions.
75310 rev2 11/1/08 15:33 Page 5