Magellan NAV 6500 - Manual (Page 59)

Magellan NAV 6500/NAV 6510 51
Turning Other Settings On and Off
Other settings on the map can be turned on and off. They
include Names of continents, countries and cities; Compass,
showing magnetic variation information points; Chart Gen-
eration, showing chart generation and nautical publication
information; Complex Object Icons which can be set to single
(individual icons for each object are superimposed on each
other) or multiple (one icon represents multiple objects in the
same location); and Info Level. (Amount of information given
for each Nav-Aid or cartographic object; can be basic or de-
tailed).
Other Settings Menu
Names ON
Compass ON
Chart Generation ON
New Objects ON
Complex Object Icon Multiple
Info. Level Detailed
Lights
When Lights are turned ON under the Nav-Aids and Fea-
tures Menu, lights will be shown on lighthouses and other
lights that rotate, a light sector will be displayed to show the
range of coverage for the light. In the No Sector setting, the
light will be shown without sectors.
Light House
Lights ON
(light sector shows
range of coverage)
Light House
NO SECTOR setting
(does not display
range of coverage)
Light House
Lights OFF
Press the Aux softkey, use the CURSOR KEY to highlight
Map Configuration Functions and press ENTER. Use the
CURSOR KEY to high-
light Other Settings
Menu and press EN-
TER.
Use the CURSOR KEY
to select the feature you
wish to activate or de-
activate and press EN-
TER.
Use the CURSOR KEY to highlight on or off and press EN-
TER. Press ESC to exit.
Default setting: ON (except for Complex Object Icon, de-
fault: Multiple; Info. Level, default: Detailed).
Turning Chart Settings On and Off
Chart related settings can be set to ON, OFF or AUTO. In
the AUTO setting, if the scale is high, only the largest chart
boundaries appear in order to avoid unnecessary clutter on
the screen.
Press the Aux softkey, use the CURSOR KEY to highlight
Map Configuration Functions and press ENTER. Use the
CURSOR KEY to highlight Chart Settings Menu and press
ENTER.