Motorola Digital StarTAC wireless phone - Manual (Page 12)

12
Introduction to Batteries
Each battery is shipped in an uncharged state with a protective
clip on it. Before you can use your phone, you will need to
remove the clip from the battery and charge it.
Battery Clips
It is a good idea to save the protective clip to store and carry the
battery when not in use. The clip prevents objects from touching
the battery terminals, thereby reducing the risk of injury or
damage from a short circuit.
Removing the Main Battery Clip
Attaching the Main Battery Clip
1. Press In
Latch Press in the release latch.
2. Remove
Battery Rotate the battery upward and lift it out of
the protective clip.
1. Lower
Side Lower the side opposite the release latch into
the clip.
2. Click
Latch Drop the side with the release latch down
until the latch clicks.
Release Latch
1.
2.
1.
2.