Miele S 548 - Manual (Page 17)

Attaching the floor brush
The floor brush is suitable for cleaning
carpets, rugs and hard surfaces. For
flooring susceptible to scratches, use
one of Miele’s specially designed floor
brushes (see "Optional accessories").
^ Insert the telescopic wand into the
floor brush and turn in either direction
until it locks with a click.
^ To release the floor brush from the
telescopic wand, press the locking
button (see arrow) and pull the wand
out of the floor brush.
Observe the cleaning instructions of
the floor manufacturer.
To clean carpets and area rugs:
^ Press the foot switch marked g .
This will retract the brush.
To clean hard flooring:
^ Press the foot switch marked h.
This will extend the brush.
Electrobrush / Turbobrush
Some models may be supplied with an
Electrobrush or a Turbobrush as a
standard accessory (see "Optional
accessories"). Please refer to the
separate operating instructions
supplied with these brushes for
instructions on use and maintenance.
Before using for the first time
17