Mr Handsfree Blue Compact Microphone - Manual (Page 24)

GB - 21
7. SOFTWARE VERSION
• Press to open the menu. The number of the software version will appear on the display.
• Press to exit the menu.
8. VOICE DIALING
If your phone supports voice dialing and there are saved voice tags (names), you can use this function via the Blue Compact.
MAKING CALLS
1. STANDBY MODE
In Standby mode the display shows the current parameters of your phone:
•
Signal strength of the cellular network at the current location. The higher the bars, the stronger the signal. The number
of bar-segments may differ slightly from your phone due to Bluetooth
® implementation for this software.
• Capacity of the battery. The higher the capacity, the more bars. If the battery is almost discharged, the icon will flash.
If the phone is in charging mode, the charger icon will appear near the battery icon.
• The Bluetooth ® name of the connected mobile phone.
• If the Bluetooth ® connection is activated, there will be a “Car” icon on the display.
Note:
Some phones don’t send battery, network or name information.
2. VOICE DIALING
Before using this function make sure that you have saved voice tags for voice dialing in your phone.
• To activate voice dialing, press and select the item “Voice call” in the menu.
• Press .
•
The below picture will appear on the display.
• After the beep, say the tag. (This beep will be sent out by your mobile phone.)
• The Blue Compact will activate the corresponding tag from the phone memory and dial the number.