McIntosh MC2301 User Manual
Page 23
23
Packing Instructions
Quantity Part Number Description
1
034105
Shipping carton top
1
034104
Shipping carton bottom
2
034439
Foam Pad (top and bottom)
3
034441
Foam Ring
2
034440
Foam Inserts (for protecting
the Tubes during shipping)
1
0410900
Warning Sheet
4
400159
10-32 x 3/4 inch screw
4
018445
Feet
Packing Instructions
In the event it is necessary to repack the equipment for
shipment, the equipment must be packed exactly as shown
below. It is very important that the four feet are attached to
the bottom of the equipment. This will ensure the proper
equipment location on the bottom foam pad. Failure to do
this will result in shipping damage.
To protect the tubes during shippment, the two Foam
Inserts removed from the MC2301 need to be re-inserted.
Follow the unpacking instructions on pages 3-4 in the
reverse order.
Use the original shipping carton and interior parts only
if they are all in good serviceable condition. If a shipping
carton or any of the interior part(s) are needed, please
call or write Customer Service Department of McIntosh
Laboratory, refer to page 3. Please see the Part List for the
correct part numbers.
WARNING
SHEET
FOAM
INSERT
FOAM
INSERT
TUBE
COVERS