MartinLogan Speaker System - Manual (Page 8)

Page 8 STATEMENT Set-up Manual
❐
❐
❐
❐
❐
❐
No Output.
Check that all your system components are turned on.
Check your speaker wires and connections.
Check all interconnecting cables.
Weak Output, Loss of Highs.
Check the power cord. Is it properly connected to the
ESL?
Exaggerated Highs, Brightness.
Check the toe-in of the speakers.
Check the setting of the Soft Contour switch.
Muddy Bass
Check placement. Try moving the speakers closer to
the back and side walls.
Check the type of feet being used. Try attaching the
coupling spikes.
Lack of Bass
Check your speaker wires. Is the polarity correct?
❐
❐
❐
❐
❐
❐
❐
❐
❐
Troubleshooting
Poor Imaging
Check placement. Are both speakers the same dis-
tance from the walls? Do they have the same amount
of toe-in? Try moving the speakers away from the back
and side walls.
Check the polarity of the speaker wires. Are they
connected properly?
Popping and Ticking Sounds, Funny Noises
These occasional noises are harmless and will nut
hurt your audio system or your speakers. All electro-
static speakers are guilty of making odd noises at one
time or another.
These noises may be caused by dirt and dust particles
collecting on the speaker, by high humidity or by AC line
fluctuations that may occur in your area.
Dirt and dust may be vacuumed off with abrush attach-
ment connected to your vacuum cleaner or you may
blow them off with compressed air.
DO NOT SPRAY ANY KIND OF CLEANING AGENT ON
OR IN CLOSE PROXIMITY TO THEM.
2001 delaware street
p.o. box 741
lawrence, kansas 66044
ph: 913.749.0133
fax: 913.749.5320
telex: 262817 mlesl