MITSUBISHI ELECTRIC WD-52631 - Manual (Page 86)

86 Chapter 7. Using IEEE 1394 Devices
Switching Between Analog and
Digital IEEE 1394 Outputs
To enable switching between analog and digital outputs,
you must have check marked the
Analog Connection
box when the New 1394 Device screen displayed when
you first connected the device. See the section “Before
You Begin” in chapter 2, “TV Connections.”
Figure 5. The ClearThought Auto Input sensing screen
for IEEE 1394 devices. Place a check in the Analog
Connection box if your device has both analog and digital
outputs.
1. Press INPUT to display the Input Selection menu.
2. Highlight the icon for the IEEE 1394 device and press
ENTER.
3. Press to switch between icons representing the
analog and digital outputs of the device. See figure
6.
Figure 6. The Input Selection menu shows icons for the
analog and digital outputs of the IEEE 1394 device.
4. Press ENTER to select the device output.