Motorola MBP11 - Manual (Page 9)

USING YOUR BABY MONITOR 9
3. USING YOUR BABY MONITOR
Please read these instructions carefully, and be reminded
that this baby monitor is just intended as an aid. It is not a
substitute for responsible, correct parental supervision.
3.1 Power on/off the parent unit
1. Provided the parent unit is off, press and hold 0 until
the Link Indicator is on. The parent unit is now
powered on and the parent unit will search for and link
itself to the baby unit.
2. Provided the parent unit is on, press and hold 0 until
the Link Indicator is off. The parent unit is now
powered off.
3.2 Power on/off the baby unit
Provided the baby unit is off, press and hold 0 until the
Power Indicator is on. The baby unit is now powered on.
Provided the baby unit is on, press and hold
0 until the
Power Indicator is off. The baby unit is now powered off.
NOTE
If you place the parent and baby units too close together,
you will hear a high pitched noise, this is normal. The units
are designed to be located at a distance from one
another, e.g. in separate rooms.
3.3 Adjust speaker volume
There are 6 volume levels on the parent unit, including
VOLUME OFF .
1. Press or on the parent unit to access the
current volume level.
2. Press to increase or to decrease the volume
of the parent unit respectively.