Cleaning the condenser unit 25, Removing the condenser unit 25, Cleaning and care – Miele T 8822 C User Manual

Page 25: Cleaning the condenser unit

Advertising
background image

Cleaning the condenser unit

Detergent residue, hair and fine fluff
from the dryer can get through the fluff
filters and block the condenser unit.
Dust from the room in which the dryer is
installed can also get into the
condenser unit and cause a blockage.

Check the condenser unit at least
twice a year. Always check it if the
Clean out airways indicator light
comes on. If the dryer is used
frequently then check the condenser
unit after approx. 100 drying cycles.
Clean it if necessary.

Removing the condenser unit

^ Open the service panel. Hold the

panel securely when doing this.

^ Now remove the panel by pulling it

diagonally upwards and place it to
one side.

^ Turn the lever on the inner cover

downwards to the vertical position.

^ Tilt the cover forwards.
^ Remove it by pulling it diagonally

upwards.

^ Turn the lever on the condenser unit

upwards to the vertical position so
that the hook on the lever is no longer
in the groove at the bottom of the
condenser unit housing.

Cleaning and care

25

Advertising