Mazda 2007 SPEED6 - Manual (Page 212)

Black plate (211,1)
NOTE
The CD will begin playback
automatically after insertion.
A CD cannot be inserted while the
display reads
“WAIT”. A beeping
sound can be heard during this waiting
time. Simultaneously pressing the
power/volume dial and the load button
(
) for about 2 seconds will turn
this beeping sound ON or OFF.
Normal insertion
1. Press the load button ( ).
2. When
“IN” is displayed, insert the CD.
Inserting CDs into desired tray number
1. Press and hold the load button ( )
for about 2 seconds until a beep sound
is heard.
2. Press the channel preset button for the
desired tray number while
“WAIT” is
displayed.
3. When
“IN” is displayed, insert the CD.
NOTE
The CD cannot be inserted to the
desired tray number if the number is
already occupied.
Multiple insertion
1. Press and hold the load button ( )
for about 2 seconds until a beep sound
is heard.
2. When
“IN” is displayed, insert the CD.
3. When
“IN” is displayed again, insert
the next CD.
NOTE
The first-inserted CD will be played
automatically when:
l No other CD is inserted within 15
seconds after
“IN” is displayed.
l The CD trays are full.
Ejecting the CD
Normal ejection
1. Press the CD eject button ( ). The
disc number and
“DISC OUT” will be
displayed.
2. Pull out the CD.
NOTE
l When the CD is ejected during play,
the next CD will be played
automatically.
l (Music CD player)
If the CD is not removed from the
slot within approximately 10 seconds
after ejection, it will be re- inserted
automatically.
Ejecting CDs from desired tray number
1. Press and hold the CD eject button ( )
for about 2 seconds until a beep sound
is heard.
The
“DISC OUT” display flashes.
2. Press the channel preset button for the
desired CD number for less than 5
seconds after the beep sound is heard.
3. Pull out the CD.
Interior Comfort
Audio System
6-31
Mazdaspeed6_8V77-EA-06F_Edition1 Page211
Tuesday, May 9 2006 10:45 AM
Form No.8V77-EA-06F