Set lengths for code 11, Set lengths for code 11 -65 – Motorola SYMBOL LS9203 User Manual
Page 245
Symbologies
9-65
Set Lengths for Code 11
The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains.
Lengths for Code 11 may be set for any length, one or two discrete lengths, or lengths within a specific range. discrete lengths, or
lengths within a specific range.
When setting lengths for different bar code types by scanning single digit numbers, single digit numbers
must always be preceded by a leading zero.
One Discrete Length - This option allows the scanner to decode only those Code 11 symbols containing a selected length. Lengths
are selected from the numeric bar codes beginning on page
in
. For example, to decode only Code
11 symbols with 14 characters, scan Code 11 - One Discrete Length, then scan 1 followed by 4. If an error is made or to change
a selection, scan Cancel on page
.
Code 11 - One Discrete Length
Two Discrete Lengths - This option allows the scanner to decode only those Code 11 symbols containing either of two
selected lengths. Lengths are selected from the numeric bar codes beginning on page
example, to decode only those Code 11 symbols containing either 2 or 14 characters, select Code 11 - Two Discrete Lengths,
then scan 0, 2, 1, and then 4. If an error is made or to change a selection, scan Cancel on page
.
Code 11 - Two Discrete Lengths
Note