Miele CVA 4066 - Manual (Page 43)

To rinse the pipework in the lid of the
stainless-steel milk container, fill the
large cleaning container to the
"max." mark with lukewarm water to
dissolve the cleaning agent.
Fit the lid of the stainless-steel milk
container into place on the large
cleaning container.
Place the cleaning container in the
appliance where the milk container
would normally sit.
Use only Miele cleaning agent,
which was developed especially for
this coffee system. You can obtain
this cleaning agent from your Miele
dealer or the Miele.com website.
The cleaning process has now begun.
When Prog. finished appears on the
display, the lines are clean, and you
can turn the machine off.
Cleaning clogged milk pipework
If no milk, just steam, comes out of the
main dispenser, the milk pipework in
the appliance door may be clogged.
^ Take the lid off the main dispenser.
Pull out the nozzles of the main
dispenser (see "Main dispenser").
^ Open the appliance door.
^ Remove the stainless steel milk
container and clean it, particularly the
lid (see "Stainless steel milk
container").
^ Unlock the cover for the milk
pipework by pressing in the two
brackets on the left and right.
Cleaning and care
43