Interfaces, Leds, At command reference guides – Multi Tech Equipment GPRS USB User Manual
Page 9
Chapter 2 – Installation
Multi-Tech Systems, Inc. MultiModem GPRS USB Wireless Modem User Guide
9
Interfaces
The Wireless MultiModem has several interfaces:
•
LED function indicating operating status
•
External antenna (via SMA connector)
•
Serial and control link (via USB connector)
•
Microphone and speaker (via handset jack)
•
SIM card holder
LEDs
LED Indicators
TD
Transmit Data. Lit when modem is transmitting data.
RD
Receive Data. Lit when modem is receiving data.
CD
Carrier Detect. Lit when data connection has been established.
LS
Line Status.
Continuous “on” state indicates that the wireless modem is not registered on the network.
Flashing state indicates registration on network.
Off state. Modem is off (not ready) or in download mode.
TR
Terminal Ready. Commonly called “Data Terminal Ready.” This is a readiness signal from the PC.
PWR Power. Indicates presence of DC power when lit.
AT Command Reference Guides
AT commands for the GPRS USB wireless modem are published in a separate GPRS AT Commands
Reference Guide included on the MultiModem CD and posted on the Multi-Tech web site.