Mounting instructions – Murphy HelmView GPS Kit User Manual
Page 10
Advertising
Section 78
00-02-0629
08-08-07 -
6 -
Mounting Instructions
Mounting options are shown below.
Mounting option 1: On a mounting flange and 1-inch pipe (not included in kit) using provided
flange, screws and washers.
NOTE: Must be located as close as possible to the center of gravity of the
boat.
Mounting option 2: Surface mount using screws (8-32) of suitable length.
NOTE: For guidelines on NMEA cabling, drop lengths, and other network
basics, refer to the “Installing an NMEA 2000
® Network” section of this
guide.
Advertising