MIDLAND GXT900 - Manual (Page 18)

®
Page 18 www.midlandradio.com
The NOAA WEATHER (WX) ALERT is automatically on during NOAA
WEATHER SCAN mode.
To turn the NOAA WEATHER (WX) ALERT on during normal NOAA
WEATHER RADIO mode, press the MENU button twice while in
NOAA WEATHER SCAN mode. The display shows "AL", while on
the right an "oF" icon appears blinking. Select "on" by pressing the
buttons. To confirm, press the PTT button or press MENU. The
radio will return to WX BAND and the WX BAND icon will continue
blinking. If the radio receives a WX ALERT signal from a designated
NOAA station while on GMRS/FRS Radio mode, the radio will beep
for 10 seconds while an "AL" and "In" icon appear on the display,
after which will automatically go to WX BAND.
If any button is pressed during beeping while on GMRS/FRS Radio
mode, the radio will automatically go to WX BAND.
To turn the NOAA WEATHER (WX) ALERT off, press the MENU
button twice while in WX Band. The display shows "AL", while on the
right an "on" icon appears blinking. Select "oF" by pressing the
buttons. To confirm, press the PTT button or press MENU.
Note : The WX Alert is automatically ON during WX SCAN
mode.
DUAL WATCH FUNCTION
Your GXT900/950 Series has a DUAL WATCH function, to enable
user to scan 2 channels for any activity. The first channel will be the
current channel setting and the second channel will be the selected
channel on the MENU.
To turn the DUAL WATCH on, press the MENU button until the “oF”
icon appears blinking on the left of the display, while the “dU” icon
appears on the left. Select the second channel by pressing the
button. Press again the MENU and the button to choose the
Privacy Code (oF/dc/ct). Then press again the MENU and button
to set the Privacy Code. Pls. note that the Privacy Code could be
set only on Ch1~22. To confirm, press the PTT button or press
MENU.
The RX and TX icon will appear at the same time to signify that the
DUAL WATCH function is on and the radio will start to scan both the
current channel/code-in-use and the selected channel/code and stop
on any active channel. Your radio will resume scanning after 4
seconds when the channel is no longer active.
Model GXT900/950 Series
/
!
/
/
/
/