MaxTech NXP-16 - Manual (Page 9)

8
ning the SETUP program.
3. Follow the Remote Boot Workstation instal-
lation procedure given in your network oper-
ating system manual (i.e. create a Boot
Image on the server for Novell networks, or
start remote booting services on LAN Man-
ager networks, etc.).
Section Three - Driver Installation
The network operating system (i.e. Novell, Win-
dows NT, LAN Manager, etc.) that you are using
requires a driver to access the network adapter
card.
The network adapters are NE-2000 com-
patible and can use the NE-2000 driver supplied
with your network operating system. Drivers for
most popular network operating systems are in-
cluded on the driver diskette in separate
subdirectories. These drivers can be copied to your
hard-drive by using the INSTALL.EXE program on
the driver disk. Information on using each driver is
available by running HELP.EXE from the root
directory of the driver disk.
Section Four - Troubleshooting
This section describes some of the common prob-
lems you may encounter while using your network
adapter. When troubleshooting, you should make
sure that the network you are connected to is
Align ROM
and socket
notches
Figure 2