Miele DA239-3 - Manual (Page 27)

Do not install this hood over
cooktops burning solid fuel.
When installing the hood, make sure
that the following
minimum safety
distance ( S ) between the top of a
Miele cooking surface and the
bottom of the hood is:
- 22" (55 cm) above electric cooktops
- 26" (65 cm) above gas cooktops
- 26" (65 cm) above an open grill
For non-Miele cooking appliances
maintain the safety distances
recommended by the cooktop
manufacturer in their installation and
operating instructions.
If there is more than one appliance
beneath the hood and they have
different minimum safety distances
always select the greater distance.
See "Warning and Safety
instructions" for further information.
26" (65 cm) is recommended for all
installations to allow for optimum work
space under the hood.
Installation procedures differ
depending on hood model and venting
method. Determine the minimum safety
distance
S before beginning the
installation. When marking the wall
make sure that
S is maintained and that
measurement H does not extend into
this area.
If the standard unit height H is not
suitable to the kitchen’s ceiling height,
longer optional chimney extensions are
available from your Miele dealer or
Miele’s Technical Service Department.
Standard unit height . . . . 32
1
/
2
" - 42
1
/
8
"
. . . . . . . . . . . . . . . . 825 mm - 1070 mm
Extensions available for this model:
DATK 239-540. . . . . . . . . 42
1
/
8
" - 52
3
/
8
"
. . . . . . . . . . . . . . . 1070 mm - 1330 mm
DATK 239 - 700 . . . . . . 52
3
/
8
" - 58
11
/
16
"
. . . . . . . . . . . . . . . 1330 mm - 1490 mm
Appliance dimensions
27