MITSUBISHI ELECTRIC PD-5050 - Manual (Page 14)

5
Battery Installation and Replacement
Insert the 2 “AAA” batteries, making sure insert them with
the proper polarity.
1.Remove the remote control’s back cover by gently
pressing the rigid tab in the direction of the arrow.
2.Install the batteries according to the (+) and (–) indication
inside the case. For ease of installation, install the
negative (–) side first.
3.Replace the cover.
�����������������������������
�������
�������
��������
����
Handling the remote control
• Do not drop or mishandle the remote control.
• Do not get the remote control wet. If the remote control
gets wet, wipe it dry immediately.
• Avoid heat and humidity.
• When not using the remote control for a long period,
remove the batteries.
• Do not use new and old batteries together, or use different
types together.
• Do not take apart the batteries, heat them, or throw them
into a fire.
Operating Range
* Use the remote control within a distance of about 7 m/
23ft. from the front of the display’s remote control sensor
and at horizontal and vertical angles of up to approximately
30°.
* The remote control operation may not function if the
display’s remote control sensor is exposed to direct
sunlight or strong artificial light, or if there is an obstacle
between the sensor and the remote control.
5