Motorola 900 series - Manual (Page 60)

Using the Options Menu 56 English
j New Security Code
The security code is used to control access to security and other
options within the menus.
This option is used to change the security code, which is set at
manufacture to 000000.
Once selected, you will be asked to enter the current security
code before you can proceed.
You will then be asked to enter a new, six digit code to replace
the old security code.
A In order to safeguard your phone, you should change your
security code from the factory setting as soon as possible.
j Extended Menus
i Press and hold M. Extended Menus will be temporarily
activated until you exit the Options menu.
This option is used to switch the extended menus on or off.
If the extended menu option is switched off, you will not be able
to access any of the extended features.
The option has two settings, On or Off.
Show Time and Date
When selected, this option displays the time and date until any
key is pressed.
j Set Time and Date
This option is used to set the time and date. You will be
prompted to Enter Time - the time must be entered in 24-hour
format. You will then be prompted to Enter Date.
j Set Time Format
This option is used to set the clock to either 12-hour or 24-hour
format.
j Language Selection
This option is used to change the language for display messages.
The option has multiple settings.
When you select a language, all further display prompts and help
messages will be in the selected language.
Battery Saving Mode
This option can help you to conserve battery power. Also known
as DTX (Discontinuous Transmission), this feature will cause your
phone to operate at reduced power when you are not talking.
The option has two settings, On or Off.
j Select Keypad Tones
This option allows you to change or disable tones you hear when
you press a key.
The option has three settings, Normal Tones, Single Tone
or No Tones.
zap.bk : opt_menu.fm5 Page 56 Wednesday, May 6, 1998 11:12 AM