Mobility Electronics PCI Expansion System P13RR-TEL - Manual (Page 9)

M A G M A
Chapter 1 Introduction 1
Chapter 1 Introduction
General Specifications
The MAGMA P13RR-TEL is a rugged COTS (Commercial-Off-The-
Shelf) 13 Slot PCI to PCI Expansion System designed specifically for
industrial telephony and military-grade configurations requiring remote
monitoring capability. In addition, this expansion was designed to meet
MIL-STD 461E. The expansion chassis is fully compliant with the PCI
Local Bus Specification. This MAGMA expansion system consists of a
PCI Host Interface Card, a PCI expansion cable (a shielded, high-speed
cable), a 16 gauge steel expansion chassis containing a 13 slot PCI
backplane, the Surveillance Pro 2 remote monitoring system and status
panel, a redundant power supply, and high volume cooling fans.
Item Description
ƒ Backplane: 13 standard PCI slots 32-bit / 33MHz
ƒ Enclosure: Black, 4U Rack-Mount
ƒ Dimensions: 19"W x 7"H x 18"D
ƒ Weight: 35lbs or 15.9kg
ƒ Standard Cable Length: 1 meter
ƒ PCI Local Bus Specification: Revision 2.2
ƒ PCI Bridge Architecture Spec: Revision 1.1
ƒ
Interconnect Bandwidth: 132 MB/sec (Theoretical Max. of PCI 33/32)
ƒ Cooling: (3) 120mm 92CFM fans
ƒ Power Supply: Dual Redundant N+1 400W Power Supply
ƒ MTBF: 53,000 hours
ƒ Operating Environment: 0º to 50º C Operating Temperature
-20º to 60º C Storage Temperature
5% to 85% Relative Humidity, Non-condensing
ƒ Operating Systems: Windows XP/2000
Mac OS X version 10.2.2+
RedHat Linux 9
ƒ Warranty: 1 Year Return to Factory
ƒ Available Options: 1.5-meter cable (PN: SUBCBL1.5HF)
CardBus Card: required to use the expansion
chassis with a laptop computer (PN: SUBCBHIF)
Rack mount slide kit (PN: RSLIDES-XX)
Pre-Installation Information
Before using the MAGMA expansion chassis you should perform the
following steps:
•
Inventory the shipping carton contents for all of the required parts
•
Gather all of the necessary tools required for installation
•
Read this manual.