MITSUBISHI ELECTRIC BDC4803H - Manual (Page 9)

Page : 9
4. Mounting the Lens
1. Set up the lens by turning it clockwise on the lens mount of the camera.
In case you are using a CS-Mount Lens connect the CS-Mount Adapter
to the lens first and then mount it to the camera body.
2. Connect the lens cable to the Auto Iris Lens Connector on the side of
the camera.
3. Adjust the Auto Iris Lens Selection Switch on the back (see page: 7)
according to the used lens: To Video (V/D) for video controlled iris lens
or DC for DC controlled iris lens.
4. Adjust back focus, when ready, fix the lens with the Back Focus Fixing
Screw.
5. DC Level DC Auto Iris Lens Level Adjustment (see page: 7).
Adjust under normal light conditions the DC Level with a
fine screw driver to the best picture performance.
Camera description